Expanding and growing a business is often challenging, as managing multiple large and complex jobs becomes increasingly difficult. During 2023, we were managing up to 50 projects simultaneously, ranging from simple 11kV protection studies, up

In a related post to last week, one of the interesting problems that has started to arise is National Grid ESO wanting the RMS simulation models handing over in an unencrypted format. This requirement has

For those of you that are not that involved in Grid Studies, National Grid ESO has recently published a guidance note on the need for EMT studies for generation connected plant. This requirement is off

As part of G99 / Grid Code compliance studies, it is necessary to carry out a series of Voltage Control studies, and check performance stability. Voltage control is used in some parts of the UK,

As part of G99 / Grid compliance studies, it is necessary to carry out a series of Frequency Control studies. This is to show how the system respond to over-frequency and under-frequency events, when operating

G99 / Grid Code – Fault Ride Through / Fast Fault Injection Fault Ride Through studies are a basic requirement of Type B and C / D generators, to demonstrate ride through for a fault

For Type C / D Generation sites in the UK, one of the most important studies to carry out in the early stages of a project is a reactive power capability assessment. This study is

Grid Code studies for larger sites directly connected to the National Grid Electricity Transmission Network, or sites above 50MW (or 30MW and 10MW in North and South Scotland) are required to be fully compliant with